Coil springs fall into two basic types

These are spiral wound coil spring using 4- 8 pieces per set made from heat treated high carbon steel and come in various shapes and sizes delivering differing coil spring tensions depending on the size of the bike and the horsepower of your engine. It is important to note that you cannot change the basic shape of these springs to gain any performance advantage but what you CAN do is buy a EBC Brakes CSK kit which have slightly thicker winding material and deliver 10-15% more clamp pressure.

• This can help reduce clutch slip or fast clutch wear on your machine.
• All springs get tired and should be replaced at every engine rebuild or clutch overhaul.

Diaphragm Springs

These are a dish shaped flat steel pressure ring and there are normally only 1 or 2 in a bikes engine, you should never add MORE coil springs on a diaphragm spring set up. If you do wish to upgrade the clamp load and your bikes is fitted with a diaphragm spring clutch kit buy an EBC Brakes spring kit, all of which are built with 10-15% more clamp pressure than jordan floral stock.

• This can again reduce clutch slip and premature clutch wear.
• When replacing your clutch on any ATV you have two options